A Mudsill is a wooden member used to distribute & spread loads from the scaffold to the ground or supporting structure. The footing base plate attaches to this wood sill with nails.
|WS012.2005||Mudsill 12″||12” x 9.5”||1’-0” x 0.80’||0.23||0.50|
|WS018.2006||Mudsill 18”||18” x 9.5”||1.5’ x 0.80’||0.34||0.75|
|WS024.2007||Mudsill 24”||24” x 9.5”||2’ x 0.80’||0.45||1.00|
|WS030.2008||Mudsill 30”||30” x 9.5”||2.5’ x 0.80’||0.68||1.50|
The Base Plate is used as a starting base for a scaffold. A Frame or Standard / Tube can be placed directly into the collar or onto the spigot located at the center of the Base Plate.
|BP001.2001||Base Plate – Frame Spigot||5.5″||0.45||1.36||3.00|
|BP002.2001A||Base Plate H.D. – System/Tube Collar||6.0″||0.50||2.58||5.69|
SCREWJACK w/ PLATE (BASE JACK)
The Screw jack is used as a starting base for a scaffold. It is adjustable up to 18” in height to allow for compensation on uneven surfaces so that a level scaffold is always attainable.
|SJ018.2000||Screw jack w/ Plate / Base Jack Fine Thread||24”||2′-0″||3.87||8.51|
|SJS18.2009||Swivel jack w/plate||24”||2′-0″||6.17||13.60|
|SCT18.2000A||Screw jack w/ Plate Base Jack Course Thread||24”||2’-0”||3.87||8.51|
CASTER 8`` HD
The Caster 8″ HD is designed to provide mobility for a small to medium size scaffold tower allowing the tower to roll across a flat surface. The Frame fits onto the stem of the Caster and can be secured into place using the locking nut.
|SCP08.2020||Caster 8″ HD Spoked||8”||–||5.49||12.1|
|SPP08.2021||Caster 8” HD Red Polyurethane Solid||8”||–||5.82||12.85|
CASTER 12” W/ SCREWJACK
The Caster 12″ (0.3m) is designed to provide mobility for a medium to large size
scaffold tower allowing the tower to roll across a flat surface. The Adapter/Solid Screw Jack is fixed to the top of the Caster using bolt and nut fixtures. This allows for the Standard to attach directly to the Adapter/Caster combination. It is adjustable in height to allow for compensation on uneven surfaces so that a level scaffold is always attainable.
|SSC08.3058||Caster 12” w/ Solid Screw Jack||0.69||2′-3″||25.45||56.1|
The Socket Jack is designed with a solid thread shaft which can accommodate a caster. This unit combined with an 8” caster can be used with either System or Frame Scaffold.
|SJC18.2010||Socket Screw Jack||24″||2′-0″||4.96||10.93|
U-HEAD w/ ADJUSTABLE JACK
The U-Head is designed to be installed at the top of a scaffold. Particularly for applications where beams are required to be supported. The screw jack adjustment allows for adjustment. Alternatively, the U-Head can be used at the base of the scaffold by turning it upside down.
|SJUHD.2011||U-Head W/ Adjustable||0.17 x 0.20||6.5″ x 8.0″||5.08||11.20|
The Base Collar is the beginning of the System Scaffold. It sits upon a Screw jack w/ Plate (Base Jack) or Swivel jack w/ Plate.
The Outrigger is connected to the start of a scaffold to extend the base for more stability.
|SOX25.2002||Outrigger w/ Bolt Clamps||29″||2.5′||9.53||21.0|
The Jack Retainer is used to secure the Base Jack or Base Collar to the Standard. This is specifically designed to be used when a scaffold is required to be lifted or craned into location.
The Scaffold Wagon is used in rougher uneven terrain to make a tower no higher than 15’ in height mobile.
|SW019.2030||Scaffold Wagon 26” Wheels||66.45||146.50|