The A-Clamp is used to secure Aluminum Beams to a U-Head or Flat Plate. A-Clamps must be used in pairs.
|CAC01-2362||Clamp A Clip w/bolt & nut||0.45||1.0|
The “V” Clamp is used to secure Aluminum Beams to the underside of the top ledger.
WALL TIE ADJUSTABLE W/ PLATE
The wall tie is designed to attach to the scaffold with bolt clamp and fasten the plate portion of the tie to a solid structure making the scaffold stable.
|ADJ18.2290||Wall Tie Adjustable Bolt Clamp w/ Plate||4.53||9.99|
WALL PLATE TIE W/ BOLT CLAMP
The Wall Tie is designed to attach to a Scaffold Tube and butt to a supporting structure. The hole allows a bolt to be installed in order to secure the scaffold Wall Ties to the supporting structure.
|ADJBT.2291||Wall Tie Bracket – Double Bolt Clamp||2.39||5.25|
HALF ROSETTE WALL PLATE
The Half Rosette Wall Plate is designed to attach to solid structure to allow the connection of a ledger head to create a stable scaffold.
|WMRP1.3060||Half Rosette Wall Plate||2.09||4.6|
ANCHOR EYE LEDGER TIE
The Anchor Eye Ledger Tie is designed to attach to anchor into wall and the ledger attaches to two points of the scaffold, usually a front vertical and a back vertical. This stabilizes the scaffold so the scaffold structure is stable.
|ANEYE||Anchor Eye Ledger Tie||0.32||0.70|
RIGHT ANGLE CLAMP
The Right Angle Clamp (I-Bolt or Wedge) is designed to be used in conjunction with scaffold tube to create 90-degree angles.
|CR1X1.2374||Right Angle Clamp – Bolt||1.66||3.65|
|CR182.2366||Right Angle Clamp – Wedge 1 5/8” X 2”||1.59||3.50|
|CR2X2.2370||Right Angle Clamp – Wedge 2” X 2”||1.59||3.65|
The Swivel Clamp (I-Bolt or Wedge) is designed to be used in conjunction with scaffold tube to create a variety of angles.
|CS1X1.2376||Swivel Clamp – Bolt||1.77||3.90|
|CS182.2372||Swivel Clamp – Wedge 1 5/8” X 2”||1.59||3.50|
|CS2X2.2372||Swivel Clamp – Wedge 2” X 2”||1.59||3.50|
The Beam Clamp (Forged Rigid or Swivel) is designed to connect a scaffold tube to the flanges of structural steel beams. They can also be used to support suspended scaffold from structural steel. Beam clamps to always be used in pairs.
|CIB01.2360||Beam Clamp – Forged Rigid||1.70||3.75|
|CIB02.2361||Beam Clamp – Forged Swivel||1.70||3.75|
The End-to-End Joiner is designed to provide a rigid connection between two tubes.
|E2EIJ.2380||End-to-End Joiner (External) Wedge Clamp 2×2||1.36||3.00|
|EEnd-to-End Joiner (Internal), 22mm Nut (7/8″)||1.36||3.00|
SPIGOT ADAPTER CLAMP
The Spigot Adapter Clamp – Bolt or Wedge allows the connection of Ringlock Standards or Frames at intermediate locations along the length of Ledgers, Truss Ledgers and Girders.
|SPACS.2358||Spigot Adapter Clamp – Bolt – System||1.59||3.50|
|SPWCS.2359||Spigot Adapter Clamp – Wedge – System||1.59||3.50|
|SPACF.2356||Spigot Adapter Saddle – Frame||1.32||2.90|
RIGHT ANGLE ADAPTER CLAMP
The Right Angle Adapter Clamp (I-Bolt or Wedge) is designed to easily join a scaffold tube directly to the rosette at 90-degrees.
|CARAB.2383||Right Angle Adapter Clamp – Bolt||1.56||3.45|
|CARAB.2384||Right Angle Adapter Clamp – Wedge||1.56||3.45|
SWIVEL ADAPTER CLAMP
The Swivel Adapter Clamp (Bolt or Wedge) is designed to easily join a scaffold tube to the rosette of a Ringlock Scaffold, producing a variety of angles and configurations.
|CASWB.2385||Swivel Adapter Clamp – Bolt||1.59||3.50|
|CASWB.2386||Swivel Adapter Clamp – Wedge||1.59||3.50|
ROSETTE / MULLEN CLAMP
The Rosette / Mullen Clamp connects anywhere along a ledger line allowing another adjacent horizontal ledger to connect to it.
|HRC01||Horizontal Rosette Clamp||1.36||3.00|
LEG LOCKING ARM (SUSPENDED SCAFFOLD)
The Leg Lock, used in pairs, is designed to connect two standards together in preparation for suspended scaffold applications.
|LACH1.3059||Leg Lock (Suspended Scaffold)||0.50||1′-8″||5.96||13.15|
VERTICAL MID TRANSOM 19.7`` (0.5M)
The Vertical Mid Transom fits vertically between two Ledgers positioned 19.7” (0.5m) apart and is attached with Half Clamps. When positioned at the mid or third points, along the length of the Ledgers, the Ledger’s maximum loading capacity is increased.
|TVMB||Vertical Mid Transom – Bolt||0.50||1′-8″||3.36||7.40|
|TVMW||Vertical Mid Transom – Wedge||0.50||1′-8″||3.36||7.30|
The Pig Tail Pin and Toggle Pin are designed to lock two Standards together to resist uplift.
|SSC01.2162||Safety Pig Tail Pin ¼” – Frame||0.05||0.12|
|SLP01.3051||Safety Pig Tail Pin 3/8” – System||0.13||0.29|
|SRP01||Split Roll Pin – Frame||0.02||0.04|
|SCP02||Spring Clip Pin – Frame||0.02||0.04|
|SCP01||Coupling Pin Tapered – Frame||0.45||0.99|
|Spigot Coupling Pin – System||0.50||1.00|